Hydranautics Purclean Replacement Membrane
This membrane is used in the R.O. units in the backroom of the wash site. The membrane is designed with low differential technology to minimize colloidal fouling when paired with conventional pre-treatment equipment. The membrane is used in low pressure systems to offer high salt rejection and longer intervals between cleanings. It has a permeate flow rate of 2,350 GPD and 99.2% salt rejection rate. It is 40" in length and 4" in outside diameter. These membranes are made of composite polyamide material and are spiral wound with 80 square feet of active area. There are four of these membranes used in a 10,000 GPD system, six used in a 15,000 GPD system, and eight used in a 20,000 GPD system.
- Permeate Flow: 2,350 GPD
- Salt Rejection: 99.2%
- Applied Pressure Rating: 100 PSI
- Max Pressure Rating: 600 PSI
- Max Feed Flow: 16 GPM
- pH Range: 6.5-7.0
- Membrane Active Area: 80 ft2
- Feed Spacer: 34 mil
- Max Operating Temperature: 113F
- Membrane Material: Composite Polyamide
- Low Differential Technology
- Designed for Low Pressure Reverse Osmosis Systems
- High Flux and Salt Rejection
- Minimize Colloidal Fouling
- Spiral Wound
*Please review our warranty policy here for additional details.