Purclean Water Reclamation System (Recommended)
The Purclean Water Reclamation system has been featured on Anderson Cooper 360, CNN. Hailed for their innovative solutions to water reuse and waste reduction, Purclean is a perfect fit for high end, environmentally conscious car washes, and dramatically reduces water requirements for car washes of any size.
Purclean Water Reclamation units available from Tommy Car Wash Systems include :
Purclean Water Reclamation units available from Tommy Car Wash Systems include :
- 24 Gram Ozone Upgrade
- Stainless Steel Upgrade
- VFD Driven Continuous Duty Motor
- Self-Priming Pump
- High Efficiency Cyclonic Separators
- 5 Micron Water Output
- Control Signal Activation
- Automatic Fresh Water Bypass
- HMI – User-Friendly Text Screen for Instant Access to Current System Status
- Self-Flushing Underflow Orifice
- Motorized Ball Valve Monitoring
- Breathers to Keep Components Cool and Increases Component Lifespan
- AquaLink Ready with Plug and Play Connectivity
- 350-5M24O Series
- PVC : (2) 3" PVC Suction lines, one for use and one for spare, to come up from settling tanks to the right of the re-circulation with 3" PVC full flapper check valves at end, 3" unions above water line. (1) 2" line out to the wash manifold. (1) 1" Line to return to the second chamber of the first reclaim tank for ozone. (1) 2" freshwater line (40PSI) to the right of the system four feet up from the bottom of the floor. (1) 1" Line to return to the catch basin for the underflow of the PurWater succession filters.
- Reclaim Maximum Output : 120 GPM
- Reclaim Pump : 5 HP - Amp draw at (208/230 Volt = 13 ) / 5 HP - Amp draw at (460/480 Volt = 6.1)
- Pump Voltage : 208-230 Volts or 460-480 Volts (depending on site specifications)
- Dimensions : 48" Wide X 84" Tall X 16" Deep
- Net Weight : 800 Lbs. (including crate)
- Electrical Requirements
- Reclaim Pump and VFD : (1) 208/230 Volt 30 Amp or 460/480 Volt 20 Amp Three phase circuits to be hard wired 5 feet up from the floor to the right of the system.
- Control Voltage for (PLC) - Logic Controller and Ozone : (1) 120 Volt 20 Amp Single phase
- Conduit : (1) 1" Conduit from reclaim equipment control box to front of the last tank (for floats). (1) .5" Conduit from each carwash equipment control box to send a control voltage signal to PurWaters repressurization power box. Control wiring from carwash controller (110V is default, 110vac, 24vac and 24vdc avail.) to be wired into control box on frame.
- Tank Configuration Recommendation : Triple or Quadruple tank configuration