All-In-One Hydra-Cell H25-X Diaphragm Pump with Stainless Steel Head
This Hydra-Cell diaphragm pump is used in the All-In-One Pump Station in the backroom of the wash tunnel. There are two pumps used on each All-In-One Pump Station that direct high pressure water to the Rocker Blasters and Wheel Blasters in the wash tunnel. The max flow rate for these pumps is 20.0 gpm. The Hydra-Cell Pump H-25-X is a durable high pressure pump capable of operating at temperatures above 200F while pumping a variety of low-to-high viscosity fluids. This pump has no seals, packing, or cups to replace, reducing the maintenance cost of the pump going forward. This pump has Kel-Cell NPT ports and a stainless steel pump head. It has Buna-N diaphragm/O-rings and stainless steel valves.
- Max Flow: 20.0 GPM
- Max Input: 1,050 RPM
- Max Inlet Pressure: 250 PSI
- Max Discharge Pressure: 1,000 PSI
- Max Operating Temp: 250F
- Inlet Port Size: 1-1/2" NPT
- Discharge Port Size: 1" NPT
- Shaft Diameter: 1-1/8"
- Shaft Rotation: Reverse
- Oil Capacity: 3.3 US Quarts
- Pump Head Material: Stainless Steel
- Diaphragm/O-Ring Material: Buna-N
- Valve Material: 17-4 Stainless Steel
- Valve Springs: Elgiloy
- Max Solids Size: 800 Microns
- Oil Type: 40-WT for Continuous-Duty
- Self-Priming
- Reverse (Bi-Directional) Shaft Rotation
- Handles Abrasive Materials
- Pumps Low-to-High Viscosity Fluids
- Uses 40-WT for Continuous-Duty Oil
- Simple Compact Design
- Kel-Cell NPT Ports
- Stainless Steel Head
- Sealless Diaphragm Pump
- Running Dry Capabilities