Canadian Natural Gas Heated Dryer Kit

(0)No Reviews yet
SKU: E-HD-2020-CA-NG-K

This heated dryer kit is used in the drying room at the end of the wash tunnel and is only meant for sites in Canada that use natural gas. Included in this kit is: two natural gas heated dryers, one heated dryer stainless frame, U-bolts, and mounting hardware needed for installation. The items in this kit are shipped loose and must be put together onsite. The heated air from these heated dryers both help dry the water off the vehicles as well as keep the air in the dryer room heated and high in temperature. The design of these heated dryers allows them to maintain constant levels of water vapor in the air, allowing them to prevent an inrush of dry air from outdoors to affect the drying ability of the dryers. They provide a heating capacity of 900,000 BTU and have a stainless steel housing to resist rust and corrosion in the wet wash environment. The efficiency of these heated dryers help block cold air that comes from overhead doors, providing exceptional value for the wash site. The electrical components and gas controls are kept safe in weatherproof enclosures.

  • Airflow Capacity: 6,200 CFM
  • Heating Capacity: 900,000 BTU/HR
  • Motor Power: 3.0 HP
  • Motor Speed: 1,750 RPM
  • Voltage: 480 V
  • Amperage: 10 A
  • # of Phases: 3 Phase
  • Frequency: 60 Hz
  • Fuel Type: Natural Gas
  • Wash Site Country: Canada
  • Material: Stainless Steel
  • Blower Dimensions: 67-1/2" X 34-1/2" X 27"
  • Frame Dimensions: 79-7/8" X 32" X 4"
  • Minimum intake spacing on inlet side of unit of 24" 

Canadian Natural Gas Heated Dryer Kit Includes:

  • (2) Natural Gas Canadian Heated Dryers
  • (1) Stainless Heated Dryer Frame
  • (8) 2-1/2" Pipe Stainless U-Bolts
  • (2) 6' Red LED Light Bars
  • (4) LED Light Bar Mounts
  • (4) 4" Square Stainless U-Bolts
  • (6) Class CC Time-Delay Fuses
  • (2) Single Pole Fuseholders
  • 1/2" and 1/4" Necessary Mounting Hardware


  • Natural Gas Blowers
  • For Wash Sites in Canada
  • Stainless Steel Construction
  • Weatherproof Electrical and Gas Control Enclosures
  • Direct Drive Axial Fan with Inlet Guard
  • Automatic Electronic Spark Ignition
  • Flame Rod Burner Supervision
  • Meets UL-508A Standards, Electrical Cabinet NEMA 4X Rated, and Gas Cabinet NEMA 1 Rated
  • Easy to Read Diagnostic Lights
  • Self-Resetting Gas Controls
  • Selectable Switch Between Summer and Winter Modes
  • 130F Temperature Rise in Winter Mode
2 Year Warranty

Ratings & Reviews

No reviews available

Be the first to Write a Review