Model 5111 HydroMinder - standard for Tommy Car Wash Systems' pump panels. Hydrominders are a highly efficient, industry standard solution for effortlessly maintaining dilution and liquid levels in modern car washes. As water flows through, the Hydrominder system siphons liquid concentrate, injecting it into the water stream and automatically maintaining the preset dilution level.
4.5 gallon per minute hydrominder.
Includes vacuum breaker, mounting bracket, and water inlet fitting.
240:1 - 4:1 Dilution Range
Installation: 1. Mount the unit in a level position on the side of a reservoir. The U-clamp may be repositioned or removed as necessary. 2. Install a minimum ½" ID water hose between the inlet threads and the water spigot. Minimum water pressure required to properly operate the proportioner is 25 PSI (flowing). 3. Attach the end of the discharge tube with the clamp and flooding ring to the discharge barb on the eductor. 4. Insert the foot valve end of the suction tube into the concentrate container. (The level of the concentrate must be below the level of the eductor, or the proportioner will continue to siphon concentrate after it is turned "off".) 5. Select a metering tip (see next two sections) and push it into the suction stub on the eductor body. 6. Slide the open end of the suction tube over the suction stub. 7. Adjust the bead chain length to position the float at the desired level of solution. To prevent foaming, be certain that the solution level will always be above the point of discharge. Be sure float mechanism is not hampered by water turbulence caused by discharging solution. It may be necessary to baffle the float from the discharge in order for the unit to work properly.
People who bought this item also bought
Hydrominder Model 5111 - 4.5 GPM
Tommy Car Wash Systems
581 Ottawa Ave. Suite 300
Holland, MI 49423